Search
Close this search box.
Search
Close this search box.

Composite Trench Covers

Light enough to remove by hand.

Strong enough for any application A15-F900

With an unrivaled unrivalled strength-to-weight ratio, lightweight Fibrelite trench covers are available in a range of load ratings (from Pedestrian 1.5 to 90 tons) tonnes) to suit every application and every budget. Easy-to-remove, safe and available in an almost limitless range of RAL colors, colours, sizes and configurations, each cover is designed to deliver years of trouble-free service even in the harshest environments.

Cast iron access covers with concrete infill

Our lightweight retrofit replacement

Trusted by specifiers, architects and engineers worldwide

Fibrelite has been at the forefront of composite quality and innovation since 1980 when we designed the world’s first FRP GRP composite manhole cover for the retail petroleum industry. Our high-performance, lightweight, safe-to-lift composite covers – including the unique ‘Extreme’ F900 load-rated trench cover – are now selected by specifiers, architects and engineers worldwide.

Not all composite covers are the same

Although FRP GRP composite covers are now increasingly preferred to the traditional metal or concrete options – not every composite cover performs to the highest standards year after year.

Fibrelite trench covers are a high-performance product created via resin transfer molding moulding (RTM) to create a durable, monolithic cover that you can truly fit-and-forget. What’s more, each one has been individually engineered in our own manufacturing facilities.

Load ratings from 3,400 lb / 1.5 tons tonnes to 202,000 lb / 90 tons tonnes

Load ratings from Pedestrian to 90 tons

Explore our trench cover range below

Pedestrian
up to: 250 to 350 lbs.
per sq./ft.

VIEW PRODUCTS +
Pedestrian loading is generally specified for sidewalks, plazas and other pedestrian only areas where no vehicular traffic of any kind is anticipated under any condition. The Pedestrian load rating is typically between 250 to 350 lbs. per sq./ft. applied over the entire area of the cover.
VIEW PRODUCTS +

ANSI Tier 8
up to: 8,000 lbs.

VIEW PRODUCTS +
Tier 8 Loading is specified for sidewalk or pedestrian only areas that may experience non-deliberate light vehicular traffic. The Tier 8 design load is 8,000 lbs. with a minimum failure load of 12,000 lbs.
VIEW PRODUCTS +

ANSI Tier 15
up to: 15,000 lbs

VIEW PRODUCTS +
Tier 15 Loading is specified for areas such as driveways, factory floors, parking lots and off roadway applications subject to occasional light vehicle traffic (such as light forklifts or light vehicles). The Tier 15 design load is 15,000 lbs. with a minimum failure load of 22,500 lbs.
VIEW PRODUCTS +

H20 Wheel Load
(20k loading)
up to: 20,800 lbs

VIEW PRODUCTS +
H20 wheel loading is specified for areas such as driveways, factory floors, parking lots and off roadway applications subject to occasional vehicular traffic. The 20K load rating has the same wheel loading as AASHTO H20 of 16,000 lbs. plus a 30% load increase due to impact forces for a total wheel load of 20,800 lbs. 20K loading is not appropriate for areas that are subject to continuous traffic such as streets or highways.
VIEW PRODUCTS +

ANSI Tier 22
up to: 18 tons / 22,500 lbs.

VIEW PRODUCTS +
Tier 22 Loading is specified for areas such as driveways, factory floors, parking lots and off roadway applications subject to heavy forklift traffic and occasional vehicular traffic. The Tier 22 design load is 22,500 lbs. with a minimum failure load of 33,750 lbs.
VIEW PRODUCTS +

AASHTO H20/HS-20
up to: 20 tons / 40,000 lbs.

VIEW PRODUCTS +
AASHTO H20 or HS-20 Loading is specified for areas that will be subjected to frequent vehicle traffic. The H20 design load is per AASHTO’s M-306-10 load test requirements – proof load testing to 40,000 lbs. without any permanent deformation exceeding 3.2 mm or 1/8”.
VIEW PRODUCTS +

AASHTO H25/HS-25
Loading up to: 25 tons / 50,000 lbs.

VIEW PRODUCTS +
AASHTO H25 or HS-25 Loading is specified for areas that will be subjected to frequent heavy vehicle traffic (such as trucks). The H25 design load is per AASHTO’s M-306-10 load test requirements – proof load testing to 50,000 lbs. without any permanent deformation exceeding 3.2 mm or 1/8”.
VIEW PRODUCTS +

AASHTO H40/HS-40
up to: 40 tons / 64,000 lbs.

VIEW PRODUCTS +
AASHTO H40 or HS-40 Loading is specified for areas that will be subjected to extremely heavy truck traffic (such as truck stops, fire stations and mining facilities). The H40 design load is per AASHTO’s M-306-10 load test requirements – proof load testing to 64,000 lbs. without any permanent deformation exceeding 3.2 mm or 1/8”.
VIEW PRODUCTS +

Extreme Loading Requirements
Up to: 90 tons / 202,000 lbs.

For applications where load ratings exceed AASHTO H40, please contact Fibrelite directly.
 
Inquire Enquire Today

Why choose a Fibrelite trench cover?
Benefits at a glance

  • Load ratings from Pedestrian to 90 tons (BS EN 124)
  • Bespoke and custom sizes available
  • The widest range of FRP GRP trench covers available to suit every requirement
  • Perfect for access to drains, ducts and piping
  • Trouble-free lightweight durable monolithic structure which will not delaminate
  • Corrosion-resistant: unaffected by water, underground gasses and most chemicals
  • Excellent insulator against heat
  • Non-metallic, non-conductive and will not spark
  • Can be installed onto our specialized specialised frame or an existing rebate
  • Treads incorporate anti-slip/skid properties far exceeding health and safety advisory limits
  • Safe easy-lift manual removal using Fibrelite’s ergonomic lifting handle, eliminating the risk of back injury or crushed fingers
  • Locks available
  • Available in virtually any UV stable color, colour, which will not flake, fade or crack
  • Logos or custom markings can be molded moulded into the upper surface
  • Covers can be custom molded moulded to accommodate pipework entry, shallow depths with stepped cover profiles, steam and gas release vents, inspection ports and much more

Explore our range of trench covers

Ergonomically-designed

As well as being lightweight – typically a third of the weight of an equivalent-size cover produced in metal or concrete, Fibrelite’s ergonomically-designed lifting aid also eliminates the risk of back injury and crushed fingers.

The Health & Safety Executive recommended load moving capabilities in relation to weight and position
Fibrelite lifting method with a 1m (40”) long C250 load rated trench cover. Weights are halved with a two person lift

Ultra-durable

Designed as a fit-and-forget product, our FRP GRP composite covers are maintenance-free, durable and very strong.

Read our wear resistance test report (Refer to clause 3.2.1 and 3.2.2, page 14)

Read our impact resistance test report (Refer to clause 4.2, page 15)

Corrosion-resistant

A prime reason for selecting a composite cover is for its inherent resistance to corrosion. This makes it an obvious choice where water, waste water or corrosive liquids are involved. Fibrelite covers are also ideal where underground infrastructure requires protection from external corrosive compounds, such as salt.

Read our corrosion resistance test report (Refer to clause 3.1.5 & 4.4, page 14 & 15)

Anti-slip/skid surface

Independent wet and dry tests carried out by Devon CC Materials Laboratory showed that Fibrelite manhole and trench covers – even when wet – have anti-slip/skid properties far exceeding health and safety advisory limits.

Read our skid resistance test report

Heat-resistant

The thermal gradient properties of a composite steam cover significantly reduces the heat transfer from a steam vault to the surface of the cover. Typically, the surface temperature of a composite cover is only slightly above ambient temperature, even when subjected to extremely hot temperatures on the underside.

In fact, Fibrelite’s high-quality steam covers maintain their cool-to-touch properties and ability to support vehicular loads, even when pushed to a test temperature of 400°F.

Read our heat resistance test report

The thermal gradient properties of a composite steam cover significantly reduces the heat transfer from a steam vault to the surface of the cover. Typically, the surface temperature of a composite cover is only slightly above ambient temperature, even when subjected to extremely hot temperatures on the underside.

In fact, Fibrelite’s high-quality steam covers maintain their cool-to-touch properties and ability to support vehicular loads, even when pushed to a test temperature of 400°F.

Read our heat resistance test report

“…I think Fibrelite is a great solution to a difficult design problem for us, of achieving both a robust and high load capacity cover to the multicore cables running from stage to control desk whilst maintaining low weight and easy access.”

Jonathan Size, Foster Wilson Architects

The world’s largest range of options

Fibrelite’s composite covers are available in almost any size, colour, shape or configuration, providing a truly bespoke
made-to-measure solution for every project.

Available in a range of widths from 300mm (12″) to 1,000mm (40″); a range of lengths from 600mm (24″) to 2,000mm (78 ¾”) and depths from 50mm (2″) to 203.2mm (8″). Custom sizes are also available.
Load ratings are available from A15 to F900.

Available in a range of widths from 300mm (12″) to 1,000mm (40″); a range of lengths from 600mm (24″) to 2,000mm (78 ¾”) and depths from 50mm (2″) to 203.2mm (8″). Custom sizes are also available. Load ratings from Pedestrian to 90 tons.

Colors Colours

Available in an almost limitless range of RAL colors. colours. As the pigment is added into the resin during manufacture, there are no issues with color colour scratching or fading over time (Colour Fastness Test Report).
Available in an almost limitless range of RAL colors. colours. As the pigment is added into the resin during manufacture, there are no issues with color colour scratching or fading over time (Color Fastness Test Report).
See it installed…

Logos/Symbols

Incorporate custom logos or markings molded moulded into the upper surface of the cover for product or brand identification, or even to identify the specific underground service that can be accessed via a particular cover.
See it installed…

Locks and restraining bolts

Locks and restraining bolts are available for added security, either a standard head operated by an Allen Key, or a bespoke Tri Head, operated by a dedicated Tri Key.

See it installed…

Custom surface finishes

Fibrelite's composite trench covers

Standard profile tread pattern

Designed to create a wet/dry anti-slip/skid surface (independently tested to far exceed health and safety advisory limits).

Low profile tread
pattern

Designed for indoor applications where a less industrial aesthetic is preferred e.g. performing arts centres.

No tread pattern/Smooth top

Designed for specialized specialised applications. Available with a hand/inspection port.
See it installed…

Custom hand hole, inspection ports and pipe and cable entries

Hand/Inspection ports with removable cover

Designed for quick inspection/maintenance. Available in modular trench or manhole covers.
See it installed…

Pipe and cable penetrations

Covers can be custom molded moulded to accommodate pipework, cable entry and steam and gas release vents.
See it installed…

Customisation cable outlet ports

Designed for multi-event stadia to accommodate the varying location of ingress and egress cabling for a variety of stadia events. Installed in some of the world’s most prestigious stadia.
See it installed…

Rain-tight modular trench covers

Gasketed frame option

A rubber seal is fitted to the frame and the covers are secured with four stainless steel bolts per cover. Plugs are provided for the key housings to complete the seal, and bolt heads covered.

See it installed…

Sealant option

Watertight sealant is applied to the frame upon installation and reapplied each time the covers are removed and replaced. Commonly specified where infrequent cover removal is expected.

See it installed…

Isolate watertight inspection/Monitoring cover

A single sealed cover and frame can be included in the trench run to enable quick access to a key part of the trench for monitoring and inspection.

Double trench covers

Where two trenches run next to each other, a single cover can span both, offering economies of both initial costs and time required for removal and replacement.

FRP GRP frames

Designed to provide enhanced chemical and corrosion resistance along as well as improved RF performance.

Manual/Lift assist handling

Lifting methods can be customized customised to suit individual requirements. For example, the covers pictured were designed for a client who requested the ‘Extreme’ load rating F900 covers over 1m wide which could be removed by a site dolly.

Specialized Specialised frame or existing rebate

Covers can be installed onto our specialized specialised frame (aluminum (aluminium or FRP) GRP) or an existing rebate.

Epoxy system frame installation

Program Programme

Oversize cast rebates can be cast into the concrete slab to accommodate epoxy frame installation at a later date so as not to delay the construction program. programme.

Installation

Speed of installation. The epoxy is stronger than concrete and will cure to be trafficable within 2-3 hours. Concrete has good compression strength but poor tensile and shear. The temperature must be 3°and rising for concrete to be poured. Epoxy can be used at 0°.

Quality

Accurate and consistent bearing ledge, particularly important when the covers are to be trafficked by HGV’s or experience higher dynamic loads.

Retro-fit

The epoxy frame installation can be retro-fitted into existing rebates.

See it installed…

Custom molded moulded stepped covers

Fibrelite trench covers can be custom molded moulded to be stepped, allowing them to be retrofitted into existing frames with shallow rebates while maintaining their structural integrity (independently tested).

This allows direct replacement of previously existing metal covers, or installation in existing precast or preformed concrete trenches. Stepping can also reduce manufacturing cost and weight.

“Dakin Contractors have worked with Fibrelite for over 20 years now and we are happy to recommend Fibrelite to any company looking to utilize utilise their services. We have always found Fibrelite to be the leader in their market…a company driven by providing a product and a service that their customers desire and are constantly striving to improve their product in response to customer feedback. Fibrelite provide top class products at competitive prices and back their products up with an excellent on-site service.”

Contracts Manager, Dakin Contractors

Fully-conductive

Potential electrostatic discharging can be eliminated by using our “fully conductive” covers. We use a metalized metallised fiber fibre within the molding moulding process to achieve electrical continuity across the entire surface of the cover – and exceed the surface resistivity requirements of PAS26.

While the standard calls out for a maximum value of 1 KΩ/cm²; Fibrelite covers actually achieve a value of 0.0144 KΩ/cm².

Read our Conductivity Test Report (Refer to clause 3.1.5, Page 14)

Technical Hub

SELECT A Resource BELOW

Approvals
 

Instruction
Manuals

Product
Brochures

Material Safety
Data Sheets

PDF/CAD
Downloads

Test
Reports

Vacuum
Testing

How to
Videos

Don’t just take our word for it…

An 18” square, raised cover manufactured and supplied by Fibrelite was put through testing as specified in BS EN 124 after 14 years solid service on a high-traffic forecourt. The test report confirms the cover easily passed and it was notable that the orange color colour had not faded, indicating that weathering and UV have no or very little impact on the performance of the Fibrelite cover over a sustained period.

Read the test report

No risk of theft

There is no risk of theft with a Fibrelite composite cover as composites have no resale value in the scrap market – so you won’t be left with a dangerous, uncovered hole in the ground.

Explore our range of trench covers